Removing The Antenna Module; Installing The Antenna Module - Dell Precision 5510 Manual Del Usuario

2. Replace the screws that secure the display hinges to the display assembly.
3. Adhere the tape to the display hinges.
4. Install the:
a) antenna cover
b) display assembly
c) wireless card
d) battery
e) base cover
5. Follow the procedures in After Working Inside Your Computer.

Removing the antenna module

1. Follow the procedures in
2. Remove the:
a) base cover
b) battery
c) wireless card
d) display assembly
e) antenna cover
f) display hinges
3. Peel the tape that covers the antenna cables.
4. Remove the screws that secure the antenna module to the display assembly.
5. Lift the antenna module away from the display assembly.
1. tape
3. screws (4)
5. display assembly

Installing the antenna module

1. Align the screw holes on the antenna module with the screw holes on the display assembly.
2. Replace the screws that secure the antenna module to the display assembly.
3. Adhere the tape that covers the antenna cable.
4. Install the:
a) display hinges
Before Working Inside Your Computer.
2. antenna cable
4. antenna module
Extracción e instalación de componentes 27