Installing The Battery; Removing The Hard Drive - Dell Precision 5510 Manual Del Usuario

Installing the Battery

1. Place and align the battery in the battery bay.
2. Tighten the screws that secure the battery to the computer.
3. Connect the battery cable to the system board.
4. Install the base cover.
5. Follow the procedures in After Working Inside Your Computer.

Removing the Hard Drive

1. Follow the procedures in
2. Remove the:
a) base cover
b) battery
3. Perform the following steps to remove the hard-drive bracket from the computer:
a) Remove the screws securing the hard-drive bracket to the computer [1].
b) Lift the hard-drive bracket off the computer [2].
4. Perform the following steps to remove the hard-drive:
a) Disconnect the hard-drive cable from the system board [1].
b) Lift the hard drive off the computer [2].
Before Working Inside Your Computer.
Extracción e instalación de componentes 9