Removing The Speakers; Installing The Speakers; Removing The Wlan Card - Dell Precision 5510 Manual Del Usuario

Removing the Speakers

1. Follow the procedures in
2. Remove the:
a) base cover
b) battery
3. Perform the following steps to remove the speaker:
a) Disconnect the speaker cable from the system board [1].
b) Remove the screws that secure the speakers to the computer [2].
c) Lift the speakers, along with the speaker cable, off the computer [3].

Installing the Speakers

1. Using the alignment posts, place the speakers on the palm-rest assembly.
2. Replace the screws that secure the speakers to the palm-rest assembly.
3. Route the speaker cables through the routing guides on the palm-rest assembly.
4. Connect the speaker cable to the system board.
5. Install the:
a) battery
b) base cover
6. Follow the procedures in After Working Inside Your Computer.

Removing the WLAN Card

1. Follow the procedures in
2. Remove the:
a) base cover
b) battery
3. Perform the following steps to remove the WLAN card:
a) Remove the screw to release the bracket that secures the WLAN card to the computer [1] and lift the bracket away from the
computer [2].
b) Disconnect the antenna cables from the WLAN card [3].
c) Slide and remove the WLAN card from its connector on the board [4].
Before Working Inside Your
Before Working Inside Your
Computer.
Computer.
Extracción e instalación de componentes 13