American Standard Mainstream Manual Del Usuario página 12

6
INSTALLING WALL & EXPANDER CAPS
• In this step, you'll need following parts: [10] x2, [11] x2
• In this step, you'll need the following tool: I
6a. I nstall Expander Cap [11] over the top of the Wall Post [8] and Door Panel [9]. Note that there is a left and
right to the Expander Cap. Then place the Wall Jam Cap [10] for a snug fit over the Expander Cap
(ref illustration). Repeat on opposite side.
6b. Once all trim caps are installed, caulk both left & right Wall Post [8] and bottom of door from the inside.
Allow 24 hours to fully dry.
[10]
6a 6b
[11]
VIEW FROM INSIDE
WAIT 24 HOURS BEFORE USE
[10]
[11]