2
INSTALLATION OF DOOR PANEL AND OPPOSITE WALL POST
• In this step, you'll need following parts: [8] x1, [9] x1
NOTE: This installation requires 2 people.
[9]
2a. Insert Door Panel [9] into slot of previously installed Wall Post [8]. (ref illustration A)
NOTE: Verify door handle location.
2b. Fully insert Door Panel [9] into Wall Post [8] until it stops. (ref illustration B)
2c. Place second Wall Post [8] over opposite end of Door Panel [9] ensuring the flange side with drilled holes
is facing inside of shower area. (ref illustration C)
2d. Press Wall Post [8] fully into place over the Door Panel [9].
2a
2b
VIEW FROM INSIDE
2c
2d