SMA Solar Technology AG
5.2.6 Setting the System Fallback
igure 22: LCS-Tool - setting the fallback parameter
A system fallback can be confgured in the event of a
communication failure between the
Inverter Manager and a superior control unit (e.g.
SCADA system or Power Plant Controller). The
superordinate system fallback can only be
confgured via the LCS-Tool. To set the values for a
superordinate fallback, use your SMA Grid Guard
code under the user group Installer (see
Section 5.2.4, page 31).
Procedure:
1. Open the LCS-Tool.
2. Log in as an Installer.
3. Call up the menu Setup.
4. Enter the respective values under Plant
fallback.
5. Select [Save] to save the changes.
Installation Manual
5 LCS-Tool
IMVIOBOX-IA-xx-18
33