Initializing Bluetooth Drivers - Bosch KTS 530 Descripción Del Producto

�.8.�

Initializing Bluetooth drivers

i
If the Bluetooth USB adapter is used on different
PC/laptop USB connections, the Bluetooth driver
installation must be carried out on each USB con-
nection.
If the Bluetooth connection is faulty or absent or alter-
native remedial measures failed (see Chapter 3.8.1),
the Bluetooth drivers must be initialized.
Proceed as follows:
Double-click on the Bluetooth manager icon
1.
?
Bluetooth settings will open
i
If the " Add New Connection Wizard" dialog win-
dow opens, continue from Item 4.
2. Check whether a KTS module appears under the
entered Bluetooth devices.
3. If no KTS module is entered: select
<New connection> and then proceed from Item
or
3. If a KTS module is entered: delete KTS module.
$
If KTS module is connected
"Bluetooth >> Disconnect" menu option.
$
Select " Bluetooth >> Delete".
$
Select < New connection>.
? Add new Connection Wizard" dialog window will
"
open.
Robert Bosch GmbH
Description of unit | ��S ��� � ��S ��� � ��S ��� | 2�
4. Select
. Select <
5.
?
6. Select <
7. Confirm prompt
close the Assistant?
:Select
8. In the "
"Bluetooth >> �erminate".
"
Bluetooth drivers are now initialized.
��S ��� � ��S ��� � ��S ��� | 2�
Express mode option.
Next>.
Bluetooth devices will be searched and displayed.
Cancel>.
Are you sure you want to
with <Yes>.
Bluetooth settings" dialogue window, select
1 689 979 987
| 2� en
|
2008-07-02