Operation; Connection Diagram; Notes Concerning Controller Diagnosis - Bosch KTS 530 Descripción Del Producto

�.�

Operation

KTS 530 can only be connected with the PC/Laptop via
the USB interface. KTS 540 and KTS 570 can be linked
with the PC/Laptop via wireless connection (Bluetooth)
or via the USB interface. Insert the Bluetooth USB
adapter in the PC/Laptop for a wireless connection.
i
The radio connection between KTS 540/KTS 570
and the PC/Laptop can only be made with the
Bluetooth USB adapter provided in the delivery.
�.�.1

Connection diagram

1
9
2
10
3
11
12 4
13 5
14
6
15
7
16
8
X9
12
BOSCH V
I
D
E
O
X7 LPT1
X2 Mouse
X25 USB1
1
X1 Kayboard X3 COM1 X4 COM2
0
X26 USB2
11
10
8
Fig. 3: Connection diagram in an example for the KTS 570
1 OBD interface in vehicle
2 UNI connection cable
3 OBD diagnosis cable
4 Measurement cables (KTS 570)
5 Measurement cables (KTS 530, KTS 540)
6 GND lead
7 Power pack
8 Adapter insert (IBOX 01)
9 KTS 570
10 USB connecting cable
11 Bluetooth USB adapter
12 PC (Laptop)
Robert Bosch GmbH
Description of unit | ��S ��� � ��S ��� � ��S ��� | 2�
1
3
2
5
4
9
6
7
��S ��� � ��S ��� � ��S ��� | 2�
�.�.2

Notes concerning controller diagnosis

KTS modules are either powered via the power supply that
is delivered or through the OBD interface of the vehicle.
!
In testing steps that require starting the motor, the
battery voltage may drop to a point that the supply is
no longer guaranteed via the vehicle. In these cases,
it may be required to supply the KTS module with the
power supply.
i
On some vehicles, the power supply through the
OBD interface may only be fed after switching the
ignition on.
The connection to the diagnosis interface in the vehicle
is made via
R
the OBD diagnostics cable (Fig. 3, item 3) or
R
the OBD diagnostics cable and the UNI connecting
cable (Fig. 3, item 2) or
R
the OBD diagnostics cable and a vehicle-specific
adapter line (special accessories).
!
The connection to the diagnosis interface in the ve-
hicle takes place via the OBD-diagnosis cable (Fig. 3,
Pos. 3) or additionally via the UNI-connection cable
(Fig. 3, Pos. 2) and vehicle-specific adapter cables
(special accessories).
i
Notes on controller diagnosis can be found in the
Online-Help.
| 2� en
|
1 689 979 987 2008-07-02