Installing The Bagger Frame - Toro Z Master 4000 Manual Del Operador

5

Installing the Bagger Frame

Parts needed for this procedure:
1 Bag support
2 Lock-pin assembly
Procedure
1. Arrange the bagger frame around the pivot pins
on the support bracket and rotate it forward
(Figure 11).
1. Pivot pin
Figure 11
2. Bagger frame
2. Insert the lock pin through the bagger frame and
cross brace
Note:
You may need to loosen the hardware to
align the lock pin to the hole.
1. Hairpin cotter
3. Use the hairpin cotter to secure the lock pin
(Figure 12).
4. Tighten all loose hardware.
g341549
12
(Figure 12).
Figure 12
2. Lock pin
g038187