Product Information; About This Instruction Manual; Winbot Power; Product Application Range - ECOVACS WINBOT 7 Serie Manual De Instrucciones

2. Product Infor mation
2.1 About this Instr uction Manual
Please carefully read the entire contents of this Instruction Manual, and use the Winbot in accordance with its instructions.
●
Operation of the unit inconsistent with the enclosed instructions could damage the product and require repair outside of
●
Warranty. Ecovacs Robotics, Inc. can not be held liable or responsible for any damages or injuries caused due to
improper use.
Keep the Instruction Manual in a safe place so it can easily be referred to with questions on operation or troubleshooting
●
problems you might encounter. Make sure all people who will use this product have read the Instruction Manual and
know where it is kept.

2.2 Winbot Power

2.3 Product Application Range

Winbot is powered through the Power Adapter provided. Only use the
●
Power Adapter that is sold with the unit.
The Back Up Battery in the Winbot is used to power the motor should the Power
●
Adapter become unplugged or the electricity fail. This safety feature ensures
that the unit will not lose suction. If the electricity fails or the Power Adapter
becomes unplugged, a warning will sound every three (3) minutes until you
turn the Winbot switch under the handle to the OFF position (far left) and
remove it from the window.
While the Winbot is plugged in and being used, the Back Up Battery will be
●
charging. You may also charge the Back Up Battery after use by placing the
switch under the handle to the CHARGE position (far right) until the Indicator
Light glows a steady GREEN.
Do NOT use the product if the Power Adapter cord, supply cord, or the power
●
plug is damaged.
Do not bend, twist, pinch, or close the Power Adapter cord or supply cord in a
●
window or door. Do not place heavy objects on the power cords.
Do not let any part of the Power Adapter or supply cord come into contact with
●
water, hot surfaces or sharp objects.
Do not unplug the Power Adapter by pulling on the cord. Always unplug by
●
grasping the plug at the outlet.
Do not touch power plug or the unit with wet hands.
●
If necessary, dust on the plug may be cleaned with a dry cotton cloth.
●
This product is intended for maintenance cleaning on common windows.
●
The Winbot is NOT intended to replace heavy duty or first time cleaning.
Windows with an uneven surface, such as frosted, textured, patterned or
●
leaded glass are not suitable to be cleaned by the Winbot.
Windows with a film, coating or tint are not suitable to be cleaned by the
●
Winbot as it may damage the coating.
Winbot is not intended for industrial use.
●
Winbot is not designed for use on small windows (less than 18" x 24"), rounded
●
windows, or glass that is mounted on an angle.
The product will not work on wet, greasy, heavily soiled, or oily windows as the
●
Driving Tread will not be able to grasp the window and move the unit; instead it
will slide down the window.
Do NOT use the Winbot outside when it is raining, snowing or colder than 40º F
●
as it will damage the product and could cause electrical problems.
Do NOT use the unit in areas where flammable materials are used or stored.
●
The product may not be used to clean cracked or broken windows as the suction
●
will do further damage to the window and could also damage the product.
Winbot is designed for use on vertically mounted glass. Do not use Winbot on
●
horizontally mounted glass or glass that is mounted at an angle.
Do not use Winbot upside down.
●
Winbot W710 is to be used ONLY on framed windows. Winbot W730 can be
●
used on framed or frameless windows.
Live Smart. Enjoy Life.
EN
6