5. MAIN MENU
Note: This menu is available only for "SUPERVISOR". To know more details, please refer to "4.3 User
Level Creation" at page 13.
Note: The menu shown here takes a 4CH model as an example. The actual display may vary.
5.1 QUICK START
5.1.1 GENERAL
GENERAL
TIME SETUP
SIMULATION
EXIT
1) CHANNEL TITLE
Select to display the channel title or not (ON / OFF).
2) EVENT STATUS
Select to display the event icons or not (ON / OFF).
Note: For details about each event icon, please refer to "3.2 Local" at page 10.
3) DATE DISPLAY
Select to display the date or not (ON / OFF).
4) MOUSE SENSITIVITY
Select the mouse sensitivity by 10 levels.
5) RECORD CONFIG
Click "SETUP" to enter the setting page individually for live display, manual record, event record and timer
record.
Note: The settings shown below depend on the setting tab you selected in this setting page.
a) IMAGE SIZE: Select the image size for each channel.
Note: The options selectable for "IMAGE SIZE" depend on the camera you're intended to connect, and
the options for selected 8CH models are up to 1280 x 720.
b) QUALITY: Select the video quality for each channel. The higher the value, the better the image quality.
c) I.P.S.: Image per Second, the higher the value, the more fluent the video.
Note: The options selectable for "I.P.S." depends on the camera you're intended to connect.
d) BITRATE (kbps): Select how much data to process per unit of time for each channel. The higher the
value, the better the video quality.
e) BITRATE CONTROL (Selected model only): Configure the upper bit rate limit for the selected channel if
necessary.
VBR - When the bit rate of the camera exceeds the value you set, the video fluency may be affected;
CBR - When the bit rate of the camera exceeds the value you set, the image quality may be affected.
f) G.O.V.: "Group of VOPs" is used to configure the length of G.O.V. The greater of the value, the less the
bandwidth for transmission, and the poorer the image quality.
QUICK START
CHANNEL TITLE
EVENT STATUS
DATE DISPLAY
MOUSE SENSITIVITY
RECORD CONFIG
ON
ON
ON
SETUP
19
MAIN MENU