Connection; Hard Disk Installation - Avtech IC-AVH516 Manual De Instrucciones

2. CONNECTION

2.1 Hard Disk Installation

A hard disk is necessary for the recorder to save video footage, and firmware upgrade might be failed if there's no
hard disk installed in this recorder.
Note: Here takes a 16CH model as an example of how to connect a hard disk to your device.
Step1: Remove the top cover, and find the hard disk connector and bracket in the device.
Bracket
Screws
Step2: Get a compatible hard disk. With the PCB side facing down, insert the hard disk to one of the hard disk
connector.
Note: To use a green hard disk, use ONLY the hard disk designed especially for surveillance to ensure
the device works properly.
CR2032
3
CONNECTION
Hard Disk
Connector
Bracket