7) HDD BUZZER
Select to enable or disable the sound (ON / OFF) when the HDD remaining capacity reaches to the value set
in "HDD NEARLY FULL (GB)".
8) ALARM DURATION (SEC)
Select the duration time for alarm buzzer in second (5 / 10 / 20 / 40).
9) HDD NEARLY FULL (GB)
If HDD BUZZER is enabled, select the duration time for buzzer notifications when the hard disk available
capacity is 5/10/15/20 GB left.
10) HDD OVERHEAT ALERT (°C)
Select the temperature alert for your hard disk to be aware of the possible overheat of your hard disk.
5.4.5 NETWORK
There are two RJ45 ports on the rear panel: WAN and LAN.
WAN is used to connect this recorder to Internet for remote access from anywhere as long as Internet access is
available.
LAN is used to connect to IP cameras locally.
DDNS is used when the Internet access is available.
Note: For more details about these three functions and network configurations, please get the setup
manual from the supplied CD or from
www.surveillance-download.com/user/network_setup/network_setup_recorder.pdf.
CONNECTION
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
NOTIFY
PSE
MULTICASTING
EXIT
ADVANCED CONFIG
WAN LAN E-MAIL DDNS NETWORK MONITOR
NETWORK TYPE
IP
GATEWAY
NETMASK
PRIMARY DNS
SECONDARY DNS
PORT
INTERNET AVAILABILITY ADDRESS
DHCP
192.168.1.112
192.168.1.254
255.255.255.0
168.95.1.1
139.175.55.244
88
www.google.com
32
MAIN MENU