Abicor Binzel ABIPLAS WELD CT Serie Instructivo De Servicio página 34

6 Putting into operation
6.3 Mounting Plasma segment holder
1 Fastener
2 Segment holder
Fig. 5 Mounting Plasma segment holder
EN - 12
1
4
3
3 10 cylinder screws M5x18
In each of the five adjustable positions (offset by 15°), only four bores are
congruent. Three for the cylinder screws and one marked for the dowel pin.
Please observe the enclosed instruction leaflet BEI.0063.
1 Bring fastener (1) and segment holder (2) into position and fix them with
the cylindrical pin (4).
2 Use the cylinder screws (3) to connect segment holder (2) and fastener (1).
ABIPLAS
2
4 Cylindrical pin 5m6x20
®
WELD CT