Eu Declaration Of Conformity; Responsibilities Of The User - Abicor Binzel ABIPLAS WELD CT Serie Instructivo De Servicio

®
ABIPLAS WELD CT
1 Identification

1.1 EU Declaration of Conformity

Designation
Relevant EC Directives
Harmonized standard applied
Tab. 1 Information regarding the EC Declaration of Conformity

1.2 Responsibilities of the User

The welding torch system ABIPLAS
automatic inert gas welding using inert or active gases. The welding torches
are liquid-cooled. The version ABIPLAS
cooling unit, whereas the ABIPLAS
system. These operating instructions only describe the welding torch system
®
ABIPLAS WELD CT. The welding torch system ABIPLAS
only be operated using original ABICOR BINZEL spare parts.
according to the EC Directives:
Machinery Directive 2006/42/EC
We,
Alexander Binzel Schweisstechnik GmbH & Co. KG
hereby declare that, on the basis of its design and construction, the welding
torch system ABIPLAS
complies with the basic safety and health requirements of the EC directive. Any
modification not agreed with us will void this declaration.
Legal representative of the documentation: Hubert Metzger
Kiesacker 7-9, 35418 Alten-Buseck
Welding torch system ABIPLAS
EC Machinery Directive 2006/42/EC
EN 60974-7, DIN EN ISO 12 100
Within the EEA (European Economic Area) the current version of the national
implementation of the Framework Directive (89/391/EEC) and the related
individual directives and, of these, especially Directive (89/655/EEC)
concerning the minimum safety and health requirements for the use of work
equipment by workers at work must be adhered to. In Germany, the Job
Protection Law and the Company Safety Ordinance must be heeded. In
addition, the operator must ensure that the welding torch and welding unit
comply with the EC EMC Directive (04/108/EC) and that the signal utilization
of the integrated welding current monitoring against stray currents is installed
properly.
®
WELD CT is used in industry for
®
150 CT20 requires a re-circulating
®
250 CT20 requires an active recooling
®
WELD CT described in these operating instructions
1 Identification
®
WELD CT may
®
WELD CT
EN - 3