Kohler Vanity K-2451 Manual De Instrucciones página 3

Top of Door
Side of Vanity
1
3
Remove/Adjust the Slow-Close Assembly
Removal
Apply a small amount of leverage to the door with one hand to
keep the door in the full open position. With the other hand, slide
the slow-close assembly back toward you, then outward away
from the door.
Replacement/Reinstallation
Apply a small amount of leverage to the door with one hand to
keep the door in the full open position. With the other hand, slide
the tab on the slow-close assembly over the slot on the hinge
base, then snap into place over the hinge base.
Open and close the door to ensure proper operation.
Adjust the bolt on the slow-close assembly to achieve the proper
rate of closure.
Adjustment
Turn the bolt on the slow-close assembly clockwise to lengthen
the closure rate. Turn the bolt counterclockwise to shorten the
closure rate.
Kohler Co.
2
Tabs
Closure Rate
Adjustment
Bolt
3
Slots
4
1049900-5-D