Operation; Unpacking The Appliance; Attaching The Accessories - Kärcher SC 1502 Manual

2. Safety Instructions
Materials containing asbestos and other items known
to contain hazardous substances must not be steam-
cleaned.
Operating the Unit
The operator may use the unit only as described in
the Operating Instructions. He is obligated to observe
local conditions and, while working with the unit, take
into account the presence of third persons, and
especially children.
This device is not intended for use by persons
(including children) with reduced physical, sensory or
mental abilities or lacking experience and/or
knowledge, unless they are supervised by a person
responsible for their safety or are instructed by these
persons on the use of the device. Children should be
supervised, to ensure that they do not play with the
device.
The unit must never be without supervision while it is
operating.
Maintenance
Prior to performing cleaning and maintenance
procedures, and before replacing parts, the unit must
be switched OFF, and the power plug must be
disconnected.
Repair and service procedures may only be
performed by authorised customer service depots or
by experts who are thoroughly familiar with all
applicable safety regulations.
Storage
Caution: Never operate or store the appliance in Caution: Caution:
Caution: Caution:
a horizontal position!
Protect the unit from rain. Do not store outside.
18 – English
All manuals and user guides at all-guides.com

3. Operation

Unpacking the Appliance

When you unpack the appliance, check that
everything is complete. If there are any missing
parts or you detect any transport damage,
please inform your dealer immediately.
Do not place the packaging into the
ordinary refuse for disposal. The
packaging materials can be recycled.
Please dispose of it at an appropriate
collection point.

Attaching the Accessories

• Firmly insert the modular accessory plug (C6)
• Connect the desired accessory part (D1, E1,
• If required, use the extension tubes (G1).
into the appliance connector (A1). Both pins of
the modular accessory plug must lock into the
cover of the appliance connector (see Figure 1).
Figure 1: Inserting the modular accessory plug
F1) with the steam gun (C1).
Put the tubular end of the accessory part on the
steam gun (C1). Then, push the accessory part onto
the steam gun until the unlocking button (C2) of the
steam gun locks into place (see Figure 2).
Figure 2: Attaching accessory to the steam gun
Attach one or both extension pieces (G1) to
the steam gun (C1) (see Figure 3). Then, push
the desired accessory part (D1, E1, F1, H1)
onto the free end of the extension tube.
Figure 3: Attaching the extension pieces
SC 1502