Declaration Of Compliance - GYS GYSFLASH 75-12HF Manual Del Usuario

▪ Always ensure the Red clamp is connected to the "+" battery terminal first.
▪ If it is necessary to connect the black clamp to the vehicle chassis, make sure it is a safe distance
from the battery and the fuel/exhaust pipe.
▪ After charging, disconnect the charger from the outlet, then disconnect the clamp from the frame
and the battery in the indicated order.
▪ The charger must be placed so that the socket is always accessible.
▪ This charger is not a toy.
▪This product should be disposed of at an appropriate recycling facility - do not dispose of in domestic
waste.
▪ Do not short-circuit the clamps during use.

DECLARATION OF COMPLIANCE

The GYS Company testifies that the charger described in this manual:
Gysflash 75-12 HF
Is manufactured in compliance with the requirements of the following European directives:
- Low Voltage Directive : 2006/95/CE du 12/12/06
- EMC Directive : 2004/108/CE du 15/12/2004- 03/05/1989.
It therefore complies with the following harmonized standards:
- EN60335-1 - EN60335-2-29 – EN55014-1 - EN55014-2 – EN61000-3-2 - EN61000-3-3 – EN62233
Marking dates CE/GS : 2013.
10/01/13
Société GYS
134 BD des Loges
53941 Saint Berthevin
Nicolas BOUYGUES
Président Directeur Général
17