Understanding The Control Board - Pit Boss PB700T1 Montaje Y Operación

UNDERSTANDING THE CONTROL BOARD

225
GRILL
P TEMP
200
300
250
350
225
200
14
250
P TEMP
225
200
CONTROL
300
250
350
225
˚F
200
400
450
475
GRILL
P TEMP
300
250
225
200
225
200
300
350
400
300
450
250 DESCRIPTION
350
The Temperature Control Dial allows you to set your
desired smoking temperature. Rotate the knob to select
475
from Smoke, any of the eight temperature presets, or High.
400
The OFF Setting on the Temperature Control Dial is the off
mode for the unit. The unit will not function on this setting.
450
The SMOKE Setting on the Temperature Control Dial is the
start-up mode for the unit. The grill operates at the lowest
475
temperature, without the fire going out.
The HIGH Setting on the Temperature Control Dial is the
highest heat level for the unit. The grill operates at the
highest temperature. When the lid is open, the grill will run
at this speed to compensate for the loss of heat in the barrel.
The LCD Screen is used as the information center for your
˚F
unit. The LCD screen will display the current grill temperature
(GRILL) and meat probe temperature (P TEMP). The LCD screen
is displayed in 5 degree (˚F) increments. See Troubleshooting
350
for more information on error codes.
400
450
READOUT DESCRIPTION
475
888 Displays once connected to AC power.
Flashing • • • Indicates the igniter is on.
P TEMP Indicates the meat probe temperature.
GRILL
˚F
Er1 Temperature probe wire not connecting.
P TEMP
ErP Power interruption while in operation.
The plug-in connection port on the front of the Control
Board is for a Meat Probe. When a meat probe is connected,
300
the temperature is displayed on the LCD Screen. When the
250
350
meat probe is not in use, disconnect the adapter from the
400
connection port.
450
475
400
450
475