Preparation - Kobalt KJS 324B-03 Manual De Instrucciones

SAFETY INFORMATION
Specific Safety Warnings for Cordless Jig Saw
• Hold power tool by insulated gripping surfaces when performing an operation where
the cutting accessory may contact hidden wiring. Cutting accessory contacting a "live"
wire may make exposed metal parts of the power tool "live" and could give the operator an
electric shock.
• Use clamps or another practical way to secure and support the work piece to a stable
platform. Holding the work by hand or against your body leaves it unstable and may lead to
loss of control.
• Always wait until the tool has come to a complete stop before placing it down. The tool insert
can jam and lead to loss of control over the power tool.
• When working with the power tool, always hold it firmly with both hands and provide a
secure stance. The power tool is guided more securely with both hands.
• Always remove the battery pack before changing the saw blade and/or adjusting the saw
base.
• The saw blade must be securely locked in its holder. Check that it has been securely seated
before use.
• Make certain that all adjusting levers and the blade holder are tight before making a cut.
Loose adjusting levers and holders can cause the tool or blade to slip; loss of control may
result.
• Never touch the saw blade after immediate use. It may be hot after prolonged use.
• Always wear safety goggles or eye protection when using this tool. Use a dust mask or
respirator or connect the tool to an external dust vacuum if cutting generates a great amount
of dust.
• Keep hands away from cutting area. Do not reach under the material being cut. The
proximity of the blade to your hand is hidden from your sight.
• Do not use dull or damaged saw blades and accessories.

PREPARATION

Know Your Jig Saw
Before attempting to use the jig saw, familiarize yourself with all of its operating features and
safety requirements.
WARNING
• Do not allow familiarity with the jig saw to cause carelessness. Remember that one careless
moment is enough to cause severe injury. Before attempting to use any tool, be sure to
become familiar with all of the operating features and safety instructions.
• Do not attempt to modify this tool or create accessories not recommended for use with this
tool. Any such alteration or modification is misuse and could result in a hazardous condition
leading to possible serious personal injury.
7