Care And Maintenance; Troubleshooting; Corrective Action; Warranty - Kobalt KJS 324B-03 Manual De Instrucciones

CARE AND MAINTENANCE

All maintenance should only be carried out by a qualified service technician.
Cleaning
Before cleaning or performing any maintenance, remove the battery pack from the jig saw. For
safe and proper operation, always keep the tool and its ventilation slots clean.
Always use only a soft, dry cloth to clean your jig saw; never use detergent or alcohol.

TROUBLESHOOTING

WARNING
• Turn the switch to the "OFF" position, press the trigger-lock button to lock it and remove the
battery pack from the jig saw before performing troubleshooting procedures.
PROBLEM
The jig saw does not work.
Blade binds, jams, or burns
the wood.
Blade cannot be removed.
Saw vibrates or shakes.

WARRANTY

5 Year Limited Tool Guarantee
For 5 years from the date of purchase, the jig saw is warranted for the original purchaser to be free
from defects in material and workmanship. This guarantee does not cover damage due to abuse,
normal wear, improper maintenance, neglect, unauthorized repair/alteration, or expendable parts
and accessories expected to become unusable after a reasonable period of use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specific legal rights, and you may also have other rights
that vary from state to state.
POSSIBLE CAUSE
Low battery capacity.
1. Improper operation.
2. Dull blade.
3. Improper blade.
Saw dust in the blade clamp
slot.
1. Damaged blade.
2. Loose blade.
14

CORRECTIVE ACTION

Charge the battery.
1. See "OPERATING
INSTRUCTIONS" section.
2. Replace blade.
3. Replace blade.
Clean the clamp slot with
brush.
1. Replace blade.
2. Remove the blade and
reinstall it.
Printed in China