Preparation - Kobalt K13RS-03 Manual De Instrucciones

SAFETY INFORMATION
• Use the power tool, accessories and tool bits, etc., in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could result in
a hazardous situation.
• Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for safe handling and control of the tool in
unexpected situations.
Service
• Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Specific Safety Warnings for Reciprocating Saw
• Hold the power tool by insulated gripping surfaces when performing an operation
where the cutting accessory may contact hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
• Use clamps or another practical way to secure and support the workpiece to a stable
platform. Holding the workpiece by hand or against your body leaves it unstable and may
lead to loss of control.
• Keep hands away from cutting area. Do not reach under the material being cut. The
proximity of the blade to your hand is hidden from your sight.
• Always disconnect the plug from the power source before changing the saw blade.
• Make certain that all adjusting levers and the blade holder are tight before making a cut. Loose
adjusting levers and holders can cause the tool or blade to slip; loss of control may result.
• Check that the switch is "off" before connecting the plug to a power source. Accidental
starting could cause injury.
• Never touch the saw blade after immediate use. It may be hot after prolonged use.
• Always wear safety goggles or eye protection when using this tool. Use a dust mask or
respirator or connect the tool to an external dust vacuum if cutting generates a great amount
of dust.

PREPARATION

Know Your Reciprocating Saw
This reciprocating saw can be used for these purposes: cutting wood products and cutting
plastic and metal materials. Before attempting to use the reciprocating saw, familiarize yourself
with all of its operating features and safety requirements.
WARNING
• Do not allow familiarity with the reciprocating saw to cause carelessness. Remember that
one careless moment is enough to cause severe injury. Before attempting to use any tool,
be sure to become familiar with all of the operating features and safety instructions.
• Do not attempt to modify this tool or create accessories not recommended for use with this
tool. Any such alteration or modification is misuse and could result in a hazardous condition
leading to possibly serious personal injury.
All manuals and user guides at all-guides.com
7