Installation Instructions; Mounting Diagram; Cleaning Instructions - Lutron SK-1B-NI Instrucciones Para La Instalación

Installation Instructions

Please Leave for Occupant

Mounting Diagram

Keypad
Important Notes -
Please Read Before Installation
1.
Ensure all controls are correctly wired and mounted
before installing faceplates.
2.
Ensure yokes of controls are free from debris (e.g. plas-
ter, spackling compound) before installing faceplate
adapter and faceplate.

Cleaning Instructions

To clean, wipe with a clean damp cloth.
chemical cleaning solutions.
Installation
1.
Remove the currently installed faceplate, adapter, and
button assembly. (See Figure 1):
a. Snap off the faceplate.
b. Remove 2 screws from the faceplate adapter and
remove adapter (if required).
c. Remove button assembly from keypad by gently pry-
ing it from the top.
Removing the faceplate adapter is required for insert
(decorator style opening) models and if the new
faceplate kit is a different color than the one being
removed.
2
. Snap on the button assembly by lining up the two tabs
on the bottom of the button assembly with the two slots
in the keypad just above the lower keypad mounting
screw. Using your thumbs, press in the bottom, and
then snap in the top of the button assembly.
3.
Attach faceplate adapter to controls with screws provid-
ed.
4.
Attach the faceplate to the faceplate adapter by press-
ing at the top and bottom of the faceplate until it snaps
into place.
Button
Assembly
Faceplate
Adapter
Faceplate
DO NOT
use any
Button and Faceplate Kit
SK-1B-NI, -2B-NI, -3B-NI, -3BRL-NI, -4B-NI, -4FS-NI, -4S-NI,
-4SIR-NI, -5B-NI, -5FS-NI, -5BRL-NI, -6B-NI, -6BRL-NI, -7B-NI
SK-1B-I, -2B-I, -3B-I, -3BRL-I, -4B-I, -4FS-I, -4S-I, -4SIR-I,
-5B-I, -5FS-I, -5BRL-I, -6B-I, -6BRL-I, -7B-I
Figure 1- Remove Faceplate and Button Assembly
A - Remove faceplate.
B - Remove adapter (if applicable).
Technical and Sales Assistance
If you need assistance, call the toll-free Lutron Technical
Support Center. Please provide exact model number
when calling.
(800) 523-9466 (U.S.A., Canada and the Caribbean)
Other countries call:
Tel: (610) 282-3800
Fax: (610) 282-3090
Visit our Web site at www.lutron.com
LIMITED WARRANTY
Lutron will, at its option, repair or replace any unit that is defective in materials or manufacture
within two years after purchase. For warranty service, return unit to place of purchase or mail to
Lutron at 7200 Suter Rd., Coopersburg, PA 18036-1299, postage pre-paid. Telephone the Lutron
Technical Support Center toll free at 800-523-9466. After the two year period, a pro-rated warranty
applies to this product until eight years after the purchase. For more information regarding this war-
ranty contact your Lutron representative.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES, AND THE IMPLIED
WARRANTY OF MERCHANTABILITY IS LIMITED TO TWO YEARS FROM PURCHASE. THIS
WARRANTY DOES NOT COVER THE COST OF INSTALLATION, REMOVAL OR REINSTALLA-
TION, OR DAMAGE RESULTING FROM MISUSE, ABUSE, OR IMPROPER OR INCORRECT
REPAIR, OR DAMAGE FROM IMPROPER WIRING OR INSTALLATION. THIS WARRANTY
DOES NOT COVER INCIDENTAL OR CONSEQUENTIAL DAMAGES. LUTRON'S LIABILITY ON
ANY CLAIM FOR DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE MANUFAC-
TURE, SALE, INSTALLATION, DELIVERY, OR USE OF THE UNIT SHALL NEVER EXCEED
THE PURCHASE PRICE OF THE UNIT.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitation may not apply to you. Some states do
not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
This product may be covered by one or more of the following U.S. patents: 4,835,343; 4,889,999;
5,170,068; 5,237,027; DES 422,567; DES 436,930 and corresponding foreign patents. U.S. and for-
eign patents pending. Lutron is a registered trademark and SeeTouch is a Trademark of Lutron
Electronics Co., Inc.
© 2003 Lutron Electronics Co., Inc.
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299
Made and printed in the U.S.A. 01/03 P/N 043-095 Rev. A
Use a small
flat blade
screwdriver.
C - Remove button assembly.