Front View - PEERLESS PARAMOUNT PPA Manual Del Usuario

Attaching Adapter Plate to Projector Mount (continued)
Insert vertical hanger bracket (D) into inner channel (C) as shown in figure 6.1 for ceiling installations, or insert
6
horizontal hanger bracket (E) into inner channel (C) as shown in figure 6.3 for wall installations.
Secure hanger bracket (D or E) to inner channel (C) using four M5 x 10 mm socket pin screws (L) as shown in
figure 6.2 or figure 6.4.
CABLES NOT SHOWN FOR CLARITy
CEILING INSTALLATION
fig. 6.1
C
D
Thread two M5 x 10 mm screws (L) into top holes of hanger bracket (D or E), leaving 1/8" (3 mm) exposed thread
7
between head of screw and hanger bracket as shown.
CEILING INSTALLATION
L
D
Visit the Peerless Web Site at www.peerlessmounts.com
C
L
D
fig. 6.2
WALL INSTALLATION
(ExCEPT FOR PPC MODELS)
L
E
WALL INSTALLATION
(ExCEPT FOR PPC MODELS)
fig. 6.3
E
9 of 33
For customer care call 1-800-865-2112 or 708-865-8870.
C
C
fig. 6.4
E
1/8"
(3 mm)

FRONT VIEW

ISSUED: 12-26-07 SHEET #: 055-9494-1
L
L
1/8"
(3 mm)
D or E