ON / OFF
0-100% dimmer
2.3 Battery handles product range
All instrument heads described in this manual fit the following battery handles and can
therefore be combined individually.
2.3.1 Battery handle type C with rheostat 2.5 V
To operate this battery handle, you will need:
- 2 commercially available alkaline batteries type C Baby (IEC standard designation LR14) or
-1 rechargeable battery 2.5 V (Art.no. 10681 ri-accu®).
-1 ri-charger® charger (art.no. 10700).
2.3.2 Battery handle type C with rheostat 3.5 V (for ri-charger® L)
To operate this battery handle, you will need:
- 1 rechargeable battery from RIESTER with 3.5 V (art.no. 10691 ri-accu® L).
- 1 ri-charger® L charger (part no. 10705, part no. 10706)
2.3.3 Battery handle type C with rheotronic® 3.5 V for charging in the wall socket 230
V or 120 V.
To operate this plug-in handle, you will need:
- 1 rechargeable battery from RIESTER with 3.5 V (art.no. 10692 ri-accu® L).
2.3.4 Battery handle type C with rheostat 3.5 V (for plug-in charger)
To operate this battery handle, you will need:
- 1 rechargeable RIESTER 3.5 V battery (part no. 10694 ri-accu® L).
-1 plug-in charger (art.no. 10707).
3. Operation and function
3.1 Symbol identification
CE mark
ON / OFF
0-100% dimmer
3.2 Startup
3.2.1 Inserting and removing batteries and rechargeable batteries
Use only the combinations described under 2.3 to 2.3.4
3.2.2 Inserting the batteries:
Battery handle (2.3.1) type C with rheostat 2.5 V:
− Unscrew the battery handle cover on the lower part of the handle in a counter-clockwise
direction.
− Insert the standard alkaline batteries designated for this battery handle with the plus side
in the direction of the handle top into the battery handle.
− Firmly screw the battery handle cover back on.
3.2.3 Removing the batteries:
Battery handle (2.3.1) type C with rheostat 2.5 V:
− Unscrew the battery handle cover on the lower part of the battery handle in a counter-
clockwise direction.
31