Riester uni I econom Instrucciones Para El Uso página 42

Guidelines and manufacturer's declaration – electromagnetic immunity
The diagnostic instruments uni® I, II, III / econom® with accessories are intended for
use in an electromagnetic environment as specified below. The customer or user of the
diagnostic instruments uni® I, II, III / econom® with accessories should ensure that
these are used in such an environment.
Immunity
testing
IEC 61000-4-6
Conducted RF
disturbances
according to IEC
61000-4-6
Emitted RF
IEC 61000-4-3
Proximity fields
of wireless RF
communications
equipment
42
IEC 60601
Testlevel
3 Vrms
0.5 MHz to 80
MHz
6 V in ISM
frequency
bands
Between 0.15
MHz and 80
MHz
80% AM at
1 kHz
3 V/m
80 MHz to 2.7
GHz
380 – 390 MHz
27 V/m; PM
50%; 18 Hz
430 – 470 MHz
28 V/m; (FM
±5 kHz, 1 kHz
sine)
PM; 18 Hz11
704 – 787 MHz
9 V/m; PM
50%; 217 Hz
800 - 960 MHz
28 V/m; PM
50%; 18 Hz
1700 - 1990
MHz
28 V/m; PM
50%; 217 Hz
2400 - 2570
MHz
28 V/m; PM
50%; 217 Hz
5100 - 5800
MHz
9 V/m; PM
50%; 217 Hz
Compli- Electromagnetic environment -
ance guidance
Not Portable and mobile RF commu-
applicable nications equipment should not be
used closer to any part of the non-
contact ri-scope® L, including the
cables, than the recommended dis-
tance, which is calculated using the
equation applicable to the trans-
mitter frequency. Recommended
separation distance.
d= 1.2 x P 80 MHz to 800 MHz
d= 2.3 x P 800 MHZ to 2.7 GHz
Where P is the maximum output
power of the transmitter in watts
(W) according to the transmitter
manufacturer and the recommen-
ded distance is in metres (m). Field
strengths of fixed RF transmitters,
determined by an electromagnetic
site survey, should be lower than
the compliance standard in each
frequency range. Interference may
occur in the vicinity of devices mar-
ked with the following symbol.
10 V/m
27 V/m
28 V/m
9 V/m
28 V/m
28 V/m
9 V/m