Steelcase Answer Manual Del Usuario página 2

®
There are sixteen unique brackets available for connecting Universal Laminate lower storage
to the Answer Beam, depending on storage height (1H or 1.5/2H), back type (recessed or
non-recessed), skin type (Fabric/Steel or Laminate/Wood), and hand (left or right) as shown
in the table below. Non-recessed and recessed back storage can be connected parallel to
the Beam, and non-recessed back can be connected perpendicular to the Beam.
Storage Height
1 High
1.5/2 High
"W" for Wood and
Laminate Skins
Fabric and Steel Skins
have NO "W"
1 High Non-Recessed
Back (LH)
Non-Recessed (LH and RH)
Fabric/Steel Skins Laminate/Wood Skins
Fabric/Steel Skins Laminate/Wood Skins
1 High Bracket Identification Marks
"UP" installed
orientation
L = Left Hand
R = Right Hand
B = Bottom Hole
T = Top Hole
Recessed (LH and RH)
Fabric/Steel Skins
Fabric/Steel Skins
L = Left Hand
R = Right Hand
1 High Recessed
Back (LH)
Laminate/Wood Skins
Laminate/Wood Skins
"UP" installed
orientation
T = Top Hole
B = Bottom Hole
1 High Recessed
Page 2 of 40
Back (RH)
100117 Rev A