Steelcase Answer Manual Del Usuario página 4

®
Removing the
Drawers or Rollouts
(Lateral Files)
TIP: When removing drawers,
make sure to mark them in
order to replace them into
their original positions.
1.
Remove screws connecting
drawer body to suspensions.
2.
Toward the rear of the
drawer, use a flat-blade
screwdriver or pry bar to
disengage the drawer body
barbs from the suspensions.
3.
Lift drawer out of
suspensions.
4.
Push extended drawer
suspension back into the case to
prevent damage and avoid injury.
5.
If removing more than one
drawer, de-activate the interlock
of the opening from which the
previous drawer was removed.
2b
2a
4
1
Shown with the
interlock cam
in the activated
position
3
Tape
Shown with
the interlock
cam in the
de-activated
position
Page 4 of 40
100117 Rev A