Steelcase Answer Manual Del Usuario página 7

®
7.
Slide the storage unit up against the bracket,
making sure to line up the nut on the bracket with
the drilled holes on the back of the storage unit.
Secure the storage unit with two (2) 1/4-20 bolts
(length as shown) and two (2) 7/8" diameter
washers (parallel only).
NOTE: Tighten to a maximum of 8 ft-lbs. Do not
use an impact wrench for this installation.
5mm HEX
5mm HEX
23mm
18mm
(7/8")
(11/16")
Parallel Parallel Drawer
Open and Perpendicular
Storage Storage
Page 7 of 40
100117 Rev A