Peavey IPR2 2000 Manual Del Operador página 51

Vue d'ensemble de la navigation
Once the IPR2 screen appears, you can start adjusting the DSP processor. Pressing the encoder will bring you to the main menu.
™
The encoder knob to the right of the display is used to navigate and control the DSP functions. The Channel A and B controls to
the left of the display are also encoders but are dedicated to adjusting input gain for each channel. Turning the encoder knob to
the right of the display will allow you to scroll through the Main Menu selections. The Main Menu not only allows you to select a
process for editing, but also provides a quick view of which processes are activated.
From left to right the menu selections are: Input Mode, Volume, Crossover/Band-Pass Filters, Equalization, Delay, Limiting,
Memory and Lock.
Input Mode Volume
Crossover / Band-Pass Filters
Equalization
Delay
Limiting
Memory Lock