Peltor PowerCom Plus MT53H7A4610 Instrucciones De Uso página 10

SUB CHANNEL
Applicable for PowerCom Plus and PowerCom headset models only. This mode changes the privacy/sub-
channel selections. By pressing the (+)(-) keys while in this mode the channels scroll up and down
accordingly. A voice message confirms each new channel number selected as the (+) (-) keys are pressed.
There are 38 sub channels plus an open 0 channel. The channels are in a rolling configuration, that is,
when the top channel has been reached, pressing (+) again will revert back down to the first channel
available, followed by a voice confirmation.
Tip(s)
1) PowerCom Plus and PowerCom headsets are compatible and will transmit to each other.
2) In order to communicate properly, all headsets in the group must be on the same main channel and
same sub-channel.
POWER
Applicable for only PowerCom Plus and PowerCom headset models.
This mode allows the selection of two transmitting power levels. When (+) is pressed, a voice confirmation
will follow and the headset will be in the maximum (high) output power transmitting mode. When the
(-) is pressed, a voice confirmation will follow and the headset will be in the lowest (low) output power
transmitting mode.
Tip(s)
1) This mode can be used as a battery conservation feature
2) Depending on distance transmitting, high power setting is not always required for good coverage.
Evaluate units in environment to be used for optimum setting.
3) The high setting will consume more battery power than the low setting.
LANGUAGE
This mode allows the selection of voice confirmations in the headset to be in one of three languages:
English, French or Spanish. By pressing the (+) (-) keys while in this mode the languages will scroll up
and down accordingly. A voice message will confirm language selected.
Notes:
1) The mode will revert back to Surround Volume Mode (in PowerCom Plus headsets) and Radio Volume
mode (in PowerCom and LiteCom headsets) if the (0) or (+) (-) keys are not activated within 5 seconds
while making selections. A beep will be heard in the headset indicating mode has automatically
reverted.
2) The headsets will also automatically shut-off if one of the following buttons (0) (+) (-) (PTT/VOX) is
not pressed within a span of 2 hours. Three tones are emitted every 30 seconds for 5 minutes prior
to shut down.
PUSH-TO-TALK (PTT) BUTTON FUNCTIONALITY
Located on the backside of the right ear cup, pressing this button keys up the lip microphone and enables
radio transmission manually. The radio will transmit, and the lip microphone will stay open as long as
the button is pressed.
VOX DISABLE FEATURE-Short cut
Double clicking the PTT button quickly will disable the vox feature, confirmed by a long beep signal in
the headset. To reactivate, double click the PTT button again and the vox will be enabled, confirmed by
a short double beep signal in the headset.
Tip: Excellent feature to use if operator moves from low to high noise periodically during the work day.
8