Technical Specifications - Festo SPC200 Manual De Instrucciones

4

Technical specifications

Type
Temperature range
Operation
Storage/transport
Weight
Relative humidity
Connection SIGNALS (X31)
Power supply (pin 4, pin 5)
Sensor inputs (pin 1...3)
Current consumption (at 24 V)
Reference potential
Connection AMPLIFIER (X30)
Input:
(+ READY, − READY)
Outputs:
(+/− DIRECT., +/− PULSE,
+/− ENABLE, +/− F/H STEP)
Step frequency
Frequency ramp
Positioning range
Resolution
1)
Note the tolerance of the connected sensors.
2)
Pin−compatible with the stepping motor controllers of the drive
package from Festo for 5 V control signals.
Festo SPC200−SMX−1 0309a English
SPC200−SMX−1
− 5 ... + 50 °C
− 20 ... + 70 °C
Approx. 69 g
95 %, non−condensing
24 V DC, ± 15 %
Inputs based on IEC 1131−2 type 2,
24 V DC, positive−switching (PNP)
Typ. 8 mA
0 V
2)
+ 24 V (connected internally with
pin 4 of the plug SIGNALS) via
relay contact
Push−pull control, electric as per
RS 485
80 Hz ... 40 kHz
Max. 500 kHz/sec
0.00 ... 9999.99 mm
0.01000 ... 9999.99999 steps/mm
1)
21