Publicidad
Security Covers
Follow these instructions carefully to avoid denting the cover edges or surfaces.
These covers are vandal resistant and non-removable, and should not be installed until the door is operating properly.
L
8
Install frame leaf cover.
157XY only
L
8a Open the hinge.
8b Position inner lip under the curved hook near hinge joint of frame leaf, making sure it is in place from top to bottom.
8c Align cover with top of hinge and use cushioning wood block to snap it into place from top to bottom. For narrow frames,
use a piece of dowel rod as a cushion.
9
Install door leaf cover.
9a Close the door.
9b As above, position lip under the curved hook near hinge joint of door leaf, making sure it is in place from top to bottom.
9c Install from top to bottom, using a light hammer tap against a wood block.
6
Wood Block
Through bolt applications shown
(157XY shown)
Through bolt application shown
For Narrow Frames
Dowel Rod
Publicidad
