KTM 69034081044 Manual Del Usuario página 10

- Attach the quick shifter to the rear with the cable ties (included in the
assembly kit).
NOTE:
For space reasons, the quick shifter cannot be used together with the
optional alarm system.
- Connect Cable1 to the quick shifter.
10
- Route Cable1 to the front as shown in the illustration.
NOTE:
Route Cable1 through the guide to the front (Figure A).
B
A
Connect Cable1 with connector ACC2 (1). ACC2 is labeled on the vehicle
cable.
NOTE:
Brown on black
Red on black/red
- Route the other end of Cable1 toward the speedometer (Figure B).
1