KTM 69034081044 Manual Del Usuario página 9

5
6
1
2
1
11
7
8
10
A
B
Scope of delivery, quick shifter 69034080000
1x sensor box (1)
1x quick shifter (2)
1x cable1 (3)
1x ON/OFF switch (5)
1x Allen key (6)
3
- Remove nuts (7) and (11) from sensor box (1).
- Nut (7) locks nut (11).
- Attach the sensor box at position (A) with nut (11). Lock with nut (7).
Basic setting of the slider
- Move the slider to the neutral position.
- Remove lock nut (8). By turning the ball head (9) in and out, align the
9
slider (10) so that it is centered over the slider housing.
- Lock the slider with lock nut (8).
- mount ball head at position (B) with screw M5x16 included in the scope
of supply (Loctite 243).
- Route the cable of the sensor box along the frame (see illustration).
NOTE:
It is convenient to route the first part of the cable in the spiral hose.
- Stick the foam (included in the assembly kit) onto the quick shifter.
9