Safety Instructions - Kärcher D 110 C Instrucciones De Montaje

Please read and comply with these instruc-
tions prior to the mounting of your appliance.
Retain these mounting instructions for future reference or
for subsequent possessors.
These installation instructions describe the installation for
the following appliances:
Assembly must be carried out by a qualified specialist.

Set the appliance up on a level surface

ATTENTION
Risk of damage for the appliance due to leaking
water. Drain the wastewater and remaining fresh
water prior to performing tasks on the appliance.
6
Attachment kit brush head D 110 C
Description

Safety instructions

Assembly
EN
B 120 W

CAUTION
Risk of tipping during removal of the cleaning
head.
Ensure safe footing of the device.

Support the rear to prevent it from tipping.

Push the appliance forward about 2 m so that the steer-

ing rollers point toward the rear.
Activate immobilising brake. Press the pedal down-

wards and move it to the right to lock it.
Uninstall present brush head; see "Uninstalling/install-

ing brush head" in the operating instructions of the de-
vice.
Lower the lift arm of the appliance (use only the grey

Intelligent Key); proceed as follows:
Rotate the info button to the menu "Manual control" and
then press it.
Rotate the info button and select the menu "Brush
head".
Press the info button - lift arm will lower, press info but-
ton again to stop it.
Loosen quick tensioner, unscrew the nut on the oppo-

site side. Remove the previous retainer on the lifting
arm.
1
-