Technical Characteristics - Ariston Simat 50 Instrucciones Para La Instalación, El Uso, La Manutención

EN
LEGIONELLA BACTERIA FUNCTION
Legionella are small rod shaped bacteria which are a natural constituent of all fresh waters. Legionaries' disease is a
pneumonia infection caused by inhaling of Legionella species. Long periods of water stagnation should be avoided; it
means the water heater should be used or flushed at least weekly.
The European standard CEN/TR 16355 gives recommendations for good practice concerning the prevention of Le-
gionella growth in drinking water installations but existing national regulations remain in force.
This electro-mechanical storage water heater is sold with a thermostat set at a temperature higher than 60°C; it means it
is enabled to carry out a "thermal disinfection cycle" to restrict the Legionella growth inside the tank.
Warning: when this software has been carrying out the thermal disinfection treatment, water temperature can cause
burns. Feel water before bathing or showering.

TECHNICAL CHARACTERISTICS

For the technical characteristics of the appliance, please refer to the information provided on the data plate (label
located near the water inlet and outlet pipes).
Product range
Weight (kg)
Installation
Model
Q (kWh)
elec
Load profile
L
wa
η
wh
V40 (l)
Capacity (l)
The power consumption data in the table and the other information given in the Product Fiche (Annex A to this manual)
are defined in relation to EU Directives 812/2013 and 814/2013.
Products which do not have the label and Product Fiche required for boiler/solar power configurations pursuant to regula-
tion 812/2013 may not be used in such installations.
Products equipped with regulator knobs have a sealing label which prevents the knob being rotated and fixes it at its set
<out-of-the-box-mode> position shown in the Product Fiche (Annex A), used by the manufacturer to declare the appli-
ance's energy class.
This appliance is conforming with the international electrical safety standards IEC 60335-1 and IEC 60335-2-21.
The CE marking of the appliances attests its conformity to the following EC Directives, of which it satisfies the es-
sential requisites:
- LVD Low Voltage Directive: EN 60335-1, EN 60335-2-21, EN 60529, EN 62233, EN 50106.
- EMC Electro-Magnetic Compatibility: EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3.
- RoHS2 Risk of Hazardous Substances: EN 50581.
- ErP Energy related Products: EN 50440.
16
Table 3 - Product information
50
16
Vertical
Refer to the nameplate
6,688
M
36,0%
65
49
80
21
Vertical
6,678
M
15 dB
36,0%
85
75
100
24
Vertical
12,867
L
37,0%
130
95