Sauder 420566 Manual De Instrucciones página 17

Step 13
1
D132
Groove
å
Insert the LARGE DRAWER SIDES (D132 and D138)
at an angle into the slot at each end of the LARGE
DRAWER FRONT (K).
3
M65
Surface with
HIDDEN CAM
å
Fasten the DRAWER BRACE (M65) to the LARGE
DRAWER FRONT (K). Tighten one HIDDEN CAM.
www.sauder.com/service
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
K
D138
1
2
Hidden part using
recycled material.
Color may vary.
K
VIEW THE T-LOCK BOX VIDEO
2
U n fi
n i s h
s u r
f a c
e
D132
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
å
Slide the DRAWER BOTTOM (D983) into the grooves
in the LARGE DRAWER SIDES (D132 and D138) and
LARGE DRAWER FRONT (K).
Start each screw a few turns before
4
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D132
M65
å
Fasten the LARGE DRAWER BACK (D175) to the LARGE
DRAWER SIDES (D132 and D138) and DRAWER
BRACE (M65). Use five BLACK 1-9/16" FLAT HEAD
SCREWS (30S). Repeat this step for the other large drawers.
The smaller drawer will use DRAWER FRONT (J), DRAWER
SIDES (D10 and D11), and DRAWER BACK (D174).
420566
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
e d
D983
D138
K
30S
(20 used in this step)
D175
Be sure the
DRAWER
BOTTOM
D138
inserts into
the DRAWER
BACK groove.
Page 17