Tabla de contenido
Publicidad
Step 14
Insert a SLIDE CAM (10A) into the LARGE DRAWER SIDES (D132 and D138).
å
Fasten a DRAWER RIGHT (40DC) to the LARGE RIGHT DRAWER SIDE (D132) and a DRAWER LEFT (40DD) to the LARGE
å
LEFT DRAWER SIDE (D138). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
NOTE: The glides are not intended to rotate.
å
Repeat this step for the other drawers.
å
Glide end
2
Page 18
10A
1
D138
VIEW THE DRAWER GLIDE VIDEO
(4 screws per drawer)
3S
GOLD 5/16" FLAT HEAD SCREW
(16 used in this step)
420566
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D132
2
www.sauder.com/service
Glide end
1
Publicidad
Tabla de contenido
