Suzuki DL1000AL4 Instrucciones Para El Montaje página 6

6/15
2. Open the gap between the grip
and the handle with a - driver,
then inject degreasing agent to
pull out the grip.
Use the - screwdriver with
care so as not to scratch the
surface of the handlebar.
NOTE: Removed left side grip will
3. Wipe off the rest of adhesive
adhered to the handlebar by
using a degreasing agent and a
waste cloth.
4. Apply cement evenly and rather
abundantly to the inside of the
Grip Heater (L) E.
GENUINE SUZUKI ACCESSORIES
NOTICE
not be reused.
Clean cloth
Grip cement
Grip Heater (L)
Handlebar
Degreasing
agent