Miele MasterCool KFP 1803 ed/cs Manual Del Usuario página 11

The stainless steel furniture front has
a high quality, special finish which is
resistant to soiling and is very easy to
clean.
~
Do not use sticky notes, transparent
adhesive tape, masking tape or other
types of adhesive on the front. These
damage the surface, causing it to lose
its dirt-repellent protective finish.
~
The high-quality finish of the
stainless steel furniture front is
susceptible to scratching. Even fridge
magnets can cause scratching.
The stainless steel furniture front
exterior surface has a layer of
protective foil to prevent damage
during transportation.
^ Do not remove the protective foil until
after the front has been fitted.
Cleaning and care
^ Remove any soiling from the stainless
steel furniture front immediately.
If this is not done, it might become
impossible to remove and could
cause the surface to alter or
discolour.
Stainless steel furniture fronts have a
special finish which is resistant to
soiling. Do not treat them with
stainless steel conditioning agent as
this will cause noticeable smearing.
en – Cleaning and care
The surface is susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or
discolour the surface.
To avoid damaging the surface, do not
use:
– cleaning agents containing soda,
ammonia, acids or chlorides,
– cleaning agents containing
descaling agents,
– cleaning agents containing solvents,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– stainless steel cleaning agents,
– dishwasher cleaner,
– oven sprays,
– glass cleaning agents,
– hard, abrasive sponges and
brushes, e.g. pot scourers,
– melamine eraser blocks,
– sharp metal scrapers.
11