Marshall Woburn Manual De Usuario página 18

LOCATING YOUR DEVICES VIA BLUETOOTH
SELECT BLUETOOTH AS THE INPUT SOURCE BY PRESSING SOURCE/WAKE
ON THE SPEAKER. BLUETOOTH IS NOW ACTIVATED, WITH A FLASHING RED
LIGHT IF NO DEVICE IS CONNECTED, AND A SOLID RED LIGHT IF A DEVICE
IS CONNECTED. WOBURN SPEAKER WILL NOW AUTOMATICALLY SEARCH
FOR PAIRED DEVICES FOR 3 MINUTES, AND THE LED WILL RAPIDLY FLASH
RED DURING THE SEARCH. THE WOBURN SPEAKER WILL LOCATE DEVICES
WITHIN RANGE THAT HAVE PREVIOUSLY BEEN CONNECTED AND WILL
CONNECT THEM AUTOMATICALLY. IF NO DEVICES ARE LOCATED WITHIN
THREE MINUTES, THE WOBURN SPEAKER WILL REVERT TO STANDBY
STATUS (EITHER POWERSAVER MODE OR STANDARD MODE, DEPENDING
ON WHICH OPTION YOU CHOOSE. THERE IS MORE INFORMATION ON MODES
IN THE STANDBY MODES SECTION ON PAGE 022.). IF THE PAIR BUTTON IS
PRESSED WHILE BLUETOOTH IS SELECTED AS THE AUDIO SOURCE, THE
WOBURN LOUDSPEAKER WILL PERFORM A NEW SEARCH FOR THREE
MINUTES AFTERWARDS, DURING WHICH TIME, THE LED LIGHT WILL
RAPIDLY FLASH RED.
NOTES:
• THE AUTO CONNECTION FUNCTION WILL NOT WORK IF THE WOBURN LOUDSPEAKER
IS TURNED OFF VIA THE MAIN POWER SWITCH AT THE TOP OF THE UNIT.
• CONNECTING A SEVENTH DEVICE WILL ERASE THE FIRST DEVICE STORED IN
THE WOBURN'S MEMORY
• ALWAYS START BLUETOOTH IN YOUR SMARTPHONE/COMPUTER FIRST, AND THEN
START WOBURN LOUDSPEAKER TO RECEIVE AN AUTO CONNECTION.
016.