Kit Assembly - Metra 95-7364B Instrucciones De Instalación

ISO DDIN radio provision
1. Mount the radio to the radio
brackets with the screws supplied
with the radio. (Figure A)
2. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
3. Mount the radio into the dash.
4. Clip the radio trim plate over
the radio/pocket assembly and
reassemble dash in reverse order
of disassembly.

Kit Assembly

(Figure A)
95-7364B
3