Save To Usb; Parts Counting - Uline Ohaus Adventurer H-5276 Manual Del Usuario

SAVE TO USB

Insert the USB flash drive into the USB slot located on the
front of the balance. Next, press the SAVE TO USB button
to save the data to the USB flash drive. Once saved, the
button will momentarily change color to orange.
(See Figure 13)
Figure 13
Weighing
Gross:
Tare:
Item Sample
Settings
NOTE: The first time a USB flash drive is
connected to the balance, there might be
some delay time before the button SAVE TO USB
works. This is due to the balance creating the
necessary folders on the USB flash drive where
the data will be stored.
The density determination and check weighing
applications do not have a SAVE TO USB button.
CAUTION! The weighing data will be saved to
USB every day. However, if different weighing
modes are used, the data will be separately
saved to individual files.
Depending on the USB drive used, all data
might not be transferred from the balance
or the display might freeze. If this happens,
unplug the USB flash drive and try another USB
flash drive.
Uline takes no responsibility if data on USB
flash drive is erased or if the USB flash drive
breaks while it is connected to the balance.
To minimize the risk of problems arising, Uline
suggests using a high quality USB flash drive.

PARTS COUNTING

Use this application to count samples of uniform weight.
1. In the upper left portion of the home screen, select
Parts Counting.
2. Press TARE or ZERO if necessary to begin.
PAGE 6 OF 54
OPERATION CONTINUED
Max 4200 g d=0.01 g
110.90
110.90 g Capacity Guide
0.00 g
3%
Save to
Menu
Name USB
3. Place objects on the pan to display the weight.
When stable, the * appears.
4. The resulting value is displayed in the main display
line in pieces (PCS). (See Figure 14)
Parts Counting
>0<
Gross:
Tare:
g
Item
4200 g
Settings
Figure 14
ITEM SETTINGS
To view or adjust current settings, touch the ITEM SETTINGS
button. The settings screen appears. (See Figure 15)
Figure 15
Samples: The sample size can be 1 to 10,000 pieces. The
default sample size is 10. Once a sample size is changed,
the balance will immediately open the recalculate APW
screen, expecting to establish a new APW.
To adjust the sample size, touch the SAMPLES button.
A numeric input window appears. (See Figure 16)
Figure 16
Use the keys to enter the desired sample size, then
press SAVE.
Max 4200 g
0
0.00 g APW:
0.00 g Auto Optimization:
Sample Save to
Name USB
Parts Counting
Samples APW
Optimization
Back
Sample Size
1 2 3
4 5 6
7 8 9
Clear 0
•
The Parts Counting
d=0.01 g
home screen
Main Display Line
pcs
Reference Fields
0.030 g
Off
Application Buttons
Menu
AUTO
Auto
Print Settings
Exit
10 PCS
Save
Exit
0521 IH-5276