Storing And Transporting Cable; Accessories - RIDGID K-1500A Manual De Instrucciones

K-1500A/B, & K-1500SP Drain Cleaning Machines
Bent Cable
Figure 10 – Bending Cable for Faster Cleaning

Storing And Transporting Cable

("A" Frame Models Only)
Cables can be stored and transported on "A" frame
models as shown in Figure 11.
Figure 11 – Storing Cables On "A" Frame Models

Accessories

Only the following RIDGID products have
WARNING
been designed to function with the Sectional Drain Clean -
ing Machines. Other accessories suitable for use with
other tools may become hazardous when used on the ma-
chines. To prevent serious injury, use only the recom -
mended accessories.
10
K-1500A/B Machines
Cables and Leaders
Catalog Model
No. No. Description
92280 C-11 15' Standard All-Purpose Wind,
Good for 4" Traps, 3" - 8" Lines.
62285 C-12 15' Extra-Heavy-Duty Wind,
4" - 10" Long Runs, No 4" Traps.
62295 C-14 15' Heavy-Duty Wind,
Through Cleanout, No 4" Traps.
62300 C-15 15' Extra-Flexible Wind,
Good for Traps.
63090 T-27 1 1 / " x 25' Leader
4
62275 C-10 15' Standard All-Purpose Wind,
Requires A-368X Jawset
Accessories
Catalog Model
No. No. Description
59470 A-8 Cable Carrier, 60' Capacity (1
59210 A-10 Cable Carrier, 150' Capacity (1
59415 A-34-10 10' Rear Guide Hose
59395 A-34-12 12' Rear Guide Hose
59400 A-34-16 16' Rear Guide Hose
59300 A-20 8' Front Guide Hose Assembly
59205 A-1 Left-Hand Mitt
59295 A-2 Right-Hand Mitt
59360 A-3 Tool Box
59225 A-12 Coupling Pin Key
59440 A-4 Trap Spoon (30")
59240 A-17 Manhole Guide Pipe
59320 A-369X 1 1 / " Replacement Jawset
4
3 / " Pitch.
8
3 / " Pitch.
8
1 / " Pitch. 3" - 10" Lines
2
1 / " Pitch. 3" - 6" Lines
2
7 / " Tools
8
1 / ")
4
1 / ")
4
278-104-421.10_REV. A