Pairing Your Wrsm; Subsequent Connection - Motorola Solutions PMMN4096 Guia Del Usuario

Pairing Your WRSM

Procedure:
1
Verify that both the host and the WRSM are powered ON (First time
only: Once the WRSM is powered ON, if not previously selected,
the WRSM will instruct the user to select language or tone, and then
it goes into Pairing Mode automatically.).
2
Both the WRSM and wireless host must be within pairing range
(recommended pairing range is within 1 meter).
3
Once the devices are paired successfully, a "Pairing Successful"
tone or "Connecting" voice prompt is played on the WRSM.
4
Do one of the following:
For Commercial Radios, press the MFB button to start the
connection process when you hear the "Ring" tone indicating Host
is requesting for connection.
For WAVE 5K, select "Option"," Application Settings", "Use
Bluetooth Device for PTT", and select "WRSM as Bluetooth device
to connect."
For others, go to step 5.
5
Wireless Link Connected with Host indication is provided upon
successful link establishment (refer to Table 2.5 on page 16).
6
Your WRSM is now ready to be used.
16
English

Subsequent Connection

Same Host:
If the Bluetooth link is lost, connection will be automatically
reestablished when the host and device come within 10 meter range
(line-of-sight).
New Host:
1
Put the wireless device in Pairing Mode by powering ON while
pressing the PTT button simultaneously.
2
Follow steps from Pairing Your WRSM.
Table 2.5: Wireless Link and Pairing Indicators
State Indication LED
Entered Pairing
Blue LED blinking
Mode
Not Paired Blue LED blinking
Paired Blue LED Solid
Successfully for 2 seconds
Blue LED
Wireless Link
Heartbeat:
Connected with
Long OFF and
Host
Short ON
Tone
Voice Prompt
Indication
— "Cleared"
Pairing Ready "Searching for
tone Host"
Pairing
"Connecting"
Successful tone
"Headset
Connected tone
Connected"