WAGNER Power TEX Manual Del Usario página 3

WARNING - To Reduce The RIsk of
dusT INhAlATIoN:
•
Avoid inhalation of mist or dust. Wear a NIOSH / MSHA
approved respirator when using this equipment or for
anyone entering the work area.
•
Maintain proper ventilation to reduce mist / dust exposure.
•
No eating, drinking or smoking should be done in the work
area to prevent ingesting contaminated paint particles.
Workers should wash and clean up before eating, drinking,
and smoking. Articles of food, drink, or smoking should not
be left in the work area where dust would settle on them.
•
Follow all warnings and recommendations provided by the
textured coating manufacturer.
WARNING - To Reduce The RIsk of
elecTRIc shock:
•
Always remove turbine before cleaning.
•
Power cord must be connected to a grounded circuit.
•
Never submerge electrical parts.
•
Never expose the equipment to rain. Store indoors.
IMportANt SAFetY INForMAtIoN
IMportANt eleCtrICAl INForMAtIoN
Use only a 3-wire extension cord that has a 3-blade grounding
plug and a 3-slot receptacle that will accept the plug on the
product. Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one heavy enough
to carry the current your product will draw. An undersized cord
will cause a drop in line voltage resulting in loss of power and
overheating. A 14 gauge or 12 gauge cord is recommended. If
an extension cord is to be used outdoors, it must be marked with
the suffix W-A after the cord type designation. For example, a
designation of SJTW-A would indicate that the cord would be
appropriate for outdoor use.
Wagner Spray Tech accessory extension cords recommended:
P/N 0090241 20 foot extension cord
P/N 0090242 35 foot extension cord
IMPoRTANT: This product is intended for household use
only.
conforms to ul sTd 1450.
certified to cAN/csA c22.2 No 68
Intertek
74657
QUeStIoNS?
call Wagner Technical service at:
1-800-328-8251
Register your product online at:
www.wagnerspraytech.com
eN
3