Kit Assembly; Din Radio Provision With Pocket - Metra 99-7877 Manual Del Usuario

DIN radio provision with pocket

1. Remove the metal DIN sleeve from
the aftermarket radio.
2. Slide the sleeve into the radio
housing and secure by bending the
metal locking tabs down.
(Figure A)
3. Slide the radio back into the sleeve
until it clicks in. (Figure B)
4. Snap the pocket into the radio
housing. (Figure C)
5. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Test the radio for proper
operation.
6. Reassemble the dash in reverse
order of disassembly.

Kit Assembly

(Figure A)
99-7877
(Figure B)
4
(Figure C)