GYS GYSFLASH 50-12 HF Manual De Instrucciones página 17

Ocultar thumbs Ver también para GYSFLASH 50-12 HF:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
EXPERT SETTINGS
This menu controls the advanced parameters of the charger. To move from one parameter to another push the Select key :
Activation «Power Supply» > Activation «Expert Curve» (> Adjusment of the «Expert Curve» parameters)
SELECT
• POWER SUPPLY mode activation :
To activate the POWER SUPPLY mode, select «EXPERT SETTINGS | Power
Supply : ON». Now this mode will be accessible from the mode list.
• «EXPERT» curve activation :
To activate the «EXPERT» curve, select «EXPERT SETTINGS | expert curve
: ON». Now this curve will be available in the charging curves list from the
CHARGE mode.
• Parameters adjustment of the «EXPERT» curve :
If the charging curve «EXPERT» is activated, the charging curve parame-
ters can be adjusted (type IUoU) :
- Unominal : battery nominal voltage (6V, 12V or 24V)
- Urecovery : recovery voltage adjustable up to 30.0V. If the value
«OFF» is selected the recovery function is inactive.
- Ucharge : charge voltage adjustable from 6.0 to 8.0V, from 12.0 to
16.0V and from 24.0 to 30.0V depending to the Unominal value selected.
- Ufloating : floating voltage adjustable depending on the Unominal
value selected. If the value «OFF» is selected the floating function is
inactive.
- Icharge : charge current of 20A for 100Ah.
aWarning: When charging on vehicle, a voltage «Urecovery» too
high might damage the electronics of the vehicle. We advise NOT
to set-up this setting above 15V for a 12V battery and not above
7.5V for a 6V battery.
GYSFLASH 50-12 HF / 50-24 HF
EXPERT CONFIGURATION
EXPERT SETTINGS
ON
Power Supply:
OFF
OFF
SELECT
EXPERT SETTINGS
ON
expert curve:
OFF
OFF
SELECT
6V
EXPERT CURVE
12V
Unominal:
12V
24V
SELECT
6.0V
EXPERT CURVE
6.1V
Ucharge:
14.3V
8.0V
SELECT
OFF
SELECT
Uch
EXPERT CURVE
Urecovery:
OFF
29,9V
30.0V
SELECT
OFF
6.0V
EXPERT CURVE
6.1V
U oating:
OFF
Uch
SELECT
EXPERT SETTINGS
Yes
Save?
No
No
EN
For the Gys ash
50-24 HF only
12.0V
24.0V
12.1V
24.1V
...
...
...
16.0V
30.0V
OFF
OFF
Uch
Uch
...
...
...
29,9V
29,9V
30.0V
30.0V
OFF
OFF
12.0V
24.0V
12.1V
24.1V
...
...
...
Uch
Uch
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Gysflash 50-24 hf

Tabla de contenido