Abicor Binzel iSTM Instructivo De Servicio página 34

6 Putting into operation
6.5 Attaching the ABIROB
®
GC torch neck
1 ABIROB
Retaining nut
2
Attaching the ABIROB
Fig. 9
6.6 Mounting the wire liner
EN - 14
®
GC torch neck
1 2
Positioning pin
3
iSTM
4
®
GC torch neck
1 Equip the ABIROB
gas nozzle.
2 Slide retaining nut (2) and protective cap (5) onto the ABIROB
neck (1) from the front.
3 Mount the ABIROB
positioning pin (3) in the iSTM (4).
4 Tighten ABIROB
(4). Use a wrench AF20 suitable for this purpose.
5 Replace protective cap (5) .
NOTE
• New still unused wire liner have to be shortened to the actual length of
the hose assembly.
• For handling the wire liner, please observe the enclosed wire guide
mounting instructions.
3
5
5
®
GC torch neck (1) with a tip adaptor, contact tip and
®
GC torch neck (1) with positioning bore onto
®
GC torch neck (1) with retaining nut (2) on the iSTM
4
Protective cap
®
GC torch
iSTM